Filter
Top Products
Program mode: EXi
158
EXi Program P4: Basic/Vector
These pages control the basic elements of the Program,
along with the Vector synthesis features. For instance,
you can:
• Select the EXi instruments which form the basis of
the Program’s sound
• Set up Vector fades between EXi 1 and EXi 2
• Set up Vector CCs to modulate Program and Effects
parameters
• Program the Vector Envelope to move the Vector
position automatically
4–1: Program Basic
This page contains all of the basic settings for the
Program. Among other things, you can:
• Select the EXi instruments which form the basis of
the Program’s sound
• Set the Program to play polyphonically or
monophonically
• Create a keyboard split between EXi 1 and EXi 2
• Select the Program’s scale
4–1a: EXi 1
EXi 1 Instrument Type [List of installed EXi]
This is the most basic setting for the EXi Program. EXi
instruments are complete synthesizers, in and of
themselves; they may create or process sounds in
completely different ways, and allow you to adjust
completely different parameters.
For instance, one EXi might be a virtual analog
synthesizer, and another might be a physically
modeled tone-wheel organ.
This menu displays all of the EXi’s installed on the
system.
You can select either one or two EXi’s for the Program.
Unlike HD-1 Programs, there is no setting for Single or
Double. If there are two EXi’s, it doesn’t matter which
EXi is in which slot. You can even select only a single
EXi, but place it in the second slot.
4–1b: EXi 2
EXi 2 Instrument Type [List of installed EXi]
This is the second EXi slot for the Program.
4–1c: Voice Assign Mode
Voice Assign options may vary with different EXi
As much as possible, different EXi instruments will
support all of the voice assign options. However, there
may be some cases in which a particular EXi does not
support a specific voice assign parameter.
Additionally, when a Program uses two different EXi
instruments, some of the voice assign options will only
take affect if they are supported by both EXi. These
include:
• The main Mode selection (Poly or Mono)
• Poly Legato
• Single Trigger
4–1PMC
4–1a
4–1c
4–1d
4–1b
4–1f
4–1g
4–1e