Filter
Top Products
Sequencer mode
450
Sequencer P1: EQ/Vector/Controller
1–1: MIDI Track EQ
Each Track has a dedicated three-band EQ, with
sweepable mid band. This page lets you view and
adjust the settings for all 16 MIDI Tracks at once.
1–1a: Location, Song/Track Select
Location [001:01.000…999:16.191]
Song Select [000…199]
Track Select [MIDI Track01…MIDI Track16,
Master Track, Audio Track01…Audio Track16]
RPPR [Off, On]
(Tempo) [040.00…240.00, EXT]
For more information, please see “0–1a: Location,
Song/Track Select” on page 415.
1–1b: 3 Band Parametric EQ
Selected Track Info
This page displays information about the track that’s
selected for editing. If you’ve selected a MIDI track,
this shows the bank type, T: MIDI track
number/program bank/number/name, Ch: MIDI
channel number, RPPR (Assign): the key number that
starts the RPPR assigned to the track, and KBD: the
bank/number/name of the program that will sound
when you play the keyboard.
If you’ve selected an audio track, this shows the AT:
audio track number/region number and name of the
first audio event, [STEREO]: Stereo Pair on/off status,
and KBD: the bank/number/name of the program that
will sound when you play the keyboard.
RPPR (Assign) will not show all of the RPPR
assignments if there are many of them. You can use the
P5– Pattern Edit page to see all of the RPPR
assignments.
Track Number
This indicates the MIDI track number. The various
parameters below each track number make settings for
the corresponding track.
Track Category [00…17]
This shows the abbreviated category name of the
Program assigned to the Track.
Track 01 (Track Number)
Auto Load Prog EQ [Off, On]
When you first load a Program into a Track, this
parameter determines whether or not the Program’s
EQ settings will be loaded as well.
Once the Program has been loaded, you can change
any or all of the EQ settings as desired. All such edits
are stored in the Combination, without affecting the
original Program.
1–1a
1–1b
1–1PMC
Select Track Info
Track Number
Track Category