Filter
Top Products
Disk: Page Menu Commands Load selected
705
If the power has just been turned on, or you want to
reproduce the state that was saved, select Clear.
.KSC Allocation
5. To load the data, press the OK button. To cancel
without loading, press the Cancel button.
Load Programs
All program data from a .PCG file will be loaded.
1. To load the data, press the OK button. To cancel
without loading, press the Cancel button.
Load Program Bank
[Bank INT-A…INT-F, Bank USER-A…USER-G]
All program data of the selected bank will be loaded
into the bank you specify.
1. In “To,” select the loading destination bank.
2. To load the data, press the OK button. To cancel
without loading, press the Cancel button.
Note: Program banks INT-A–INT-E are bank type
HD-1, and the INT-F bank is bank type EXi. The
bank types of these banks are fixed; you cannot set
the “To” field to a bank whose type differs from the
data selected for loading.
Program banks USER-A–USER-G can be freely
specified as either HD-1 or EXi (“Set Program User-
Bank Type.” You can load .PCG files of a bank type
that differs from the OASYS’s current bank type
setting. This will also overwrite the bank type.
Note: If “Multiple Select” (0–1a) is checked and you’ve
selected more than one bank, the data will be loaded
starting with the bank you specified in the “To” field.
In this case, if you attempt to load a bank of a differing
bank type into INT-A–INT-E (fixed at HD-1) or INT-F
(fixed at EXi), INT-A–INT-F banks will be skipped, and
the data will be loaded starting from USER-A.
Load a Program
Data for the selected program will be loaded into the
program number you specify.
1. If you wish to load a program other than the one
already selected, use “Program” (upper line) to
select the program that you wish to load.
Note: The selected program can be played from the
keyboard even before you load it. This is convenient
when you want to audition the program to be
loaded. (See “Auditioning sounds from disk” on
page 693)
2. In “To Program,” (lower line) select the bank and
program into which the data will be loaded. When
you press the popup button, the “Bank/Program
Select” window (Program 0–1a) will appear.
Note: You cannot set the “To” field to a bank whose
type differs from the selected program.
Note: If “Multiple Select” (0–1a) is checked and
you’ve selected more than one program, the data
will be loaded starting with the program you
specified in the “To” field.
3. To load the data, press the OK button. To cancel
without loading, press the Cancel button.
Load Combinations
All combinations in the .PCG file will be loaded.
1. To load the data, press the OK button. To cancel
without loading, press the Cancel button.
Load Combination Bank
[Bank INT-A…INT-G, Bank USER-A…USER-G]
All combinations in the selected bank will be loaded
into the bank you specify.
KMP000
KMP001
KMP005
KMP003
KMP000
KMP002
KMP003
KMP000
KMP002
KMP005
KMP003
KMP000
KMP001
KMP005
KMP003
KMP004
KMP007
KMP006
KMP000
KMP001
KMP005
KMP003
KMP000
KMP002
KMP003
Append
Clear
.KMP file to load Internal memory of the
OASYS after loading
Internal memory of the
OASYS before loading