Filter
Top Products
Sequencer P0: Play/REC 0–9: Control Surface
441
On most pages, you can also toggle Exclusive Solo by
holding ENTER and pressing 1 on the numeric
keypad.
Select 1/9–8/16 [Off, On]
These buttons either select or solo the Track,
depending on the state of the Solo switch. For more
details, see Solo, above.
You can link these Select buttons to the Keyboard Track
selection, so that you can switch between playing the
different tracks simply by pressing their front-panel
buttons. For more information, see “Link KBD/REC
Trk to Ctrl Surface,” below.
Link KBD/REC Trk to Ctrl Surface [Off, On]
This on-screen check-box links the Select buttons to the
Keyboard Track (for MIDI tracks) and the Rec track
(for HDR audio tracks).
When the box is checked, and CONTROL SELECT is
set to TIMBRE/TRACK, pressing the Select buttons
will change the Keyboard Track, and vice-versa.
Also, when CONTROL SELECT is set to AUDIO HDR
1–8 or 9–16, pressing the Select buttons will change the
audio record track, and vice-versa.
Volume Sliders 1/9–8/16
These sliders adjust the volume level of the Tracks.
Volume 1/9 [000…127]
This controls the volume of either Track 1 or Track 9,
depending on whether the TIMBRE/TRACK button is
set to 1–8 or 9–16.
Volume 2/10–8/16 [000…127]
These control the volume of Tracks 2–8 or 10–16,
depending on the setting of the TIMBRE/TRACK
button. For more details, see Volume 1/9, above.
Master Volume Slider
Master Volume [000…127]
This controls the volume of the main stereo outputs,
after the Total Effects. It does not affect Individual
Outputs 1–8.
Master Volume
TFX 2
Control Surface
Master Volume
Slider
Front Panel
Analog Volume
Slider
Universal Exclusive
Master Volume
(Fom Knobs, Pedals,
MIDI, or Sequencer)
Headphone
& Main L/R
Outputs
S/PDIF
Output