Filter
Top Products
Sequencer mode
428
0–5: Preferences
Here you can specify the realtime recording method,
adjust levels and make other settings for audio
recording, and adjust the metronome settings.
Selected Track Info
This displays information about the currently selected
MIDI or audio track. For more information, see “0–1b:
Track Program Select” on page 418.
0–5a: Recording Setup
Selects the method of realtime recording.
For detailed, step-by-step instructions, please see
“MIDI recording” on page 83 of the Operation Guide.
Overwrite
When recording for the first time, you will normally
select this method.
To begin recording, press the SEQUENCER
REC/WRITE switch and then the SEQUENCER
START/STOP switch. To stop recording, press the
SEQUENCER START/STOP switch once again.
If you use this method to record on a track that has
already been recorded, the result will differ depending
on the track or type of event, as follows.
MIDI Tracks, Audio Track Automation Events: All
data following the measure at which you begin
recording will be erased.
Audio Track Audio Events: As with Overwrite, only
the measures you recorded will be overwritten; the
data in subsequent measures will remain unchanged.
Overdub
Select this method when you wish to add data to a
previously-recorded track. (except for audio events)
To begin recording, press the SEQUENCER
REC/WRITE switch and then the SEQUENCER
START/STOP switch. To stop recording, press the
SEQUENCER START/STOP switch once again.
If you use this method to record on a track that has
already been recorded, the result will differ depending
on the track or type of event, as follows.
MIDI Tracks, Audio Track Automation Events: The
previously-recorded data will remain, and the newly-
recorded data will be added to it.
Audio Track Audio Events: As with Overwrite, only
the measures you recorded will be overwritten; the
data in subsequent measures will remain unchanged.
Manual Punch In
Select this method when you wish to use the
SEQUENCER REC/WRITE switch or a foot switch to
re-record selected portions of a previously-recorded
track.
Press the SEQUENCER START/STOP switch to
playback the song. When you reach the measure at
which you wish to begin re-writing the data, press the
SEQUENCER REC/WRITE switch or the foot switch,
and recording will begin. When you are finished
recording, press the SEQUENCER REC/WRITE switch
or the foot switch once again, and recording will end.
Auto Punch In
Select this method when you wish to automatically re-
record selected portions of a previously-recorded
track.
0–1a
0–1b
0–5a
0–5c
0–5b
0–5d
0–5PMC