Korg Electronic Keyboard Electronic Keyboard User Manual


  Open as PDF
of 1127
 
Effect Guide
810
OUTPUT
This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see “OUTPUT” on page 764.
056: Stereo Auto Fade Mod.
This stereo chorus/flanger effect enables you to control
the LFO speed and effect balance using auto fade, and
you can spread the sound by offsetting the phase of the
left and right LFOs from each other.
AUTOFADE
For more information on the Autofade parameters, see
“AUTOFADE” on page 809.
Source [Off…Tempo]
Selects the modulation source that starts AutoFade.
Rate [1…100]
Sets the rate of fade-in.
Fade-In Delay [msec] [00…2000]
Sets the fade-in delay time.
LFO Frequency Mod [Dmod, AUTOFADE]
Switches between D-mod and AUTOFADE for the LFO
frequency modulation.
Wet/Dry Mod [Dmod, AUTOFADE]
Switches between D-mod and AUTOFADE for the
effect balance modulation.
MOD DELAY
L Delay Time [msec] [0.0…500.0]
Sets the left channel delay time.
R Delay Time [msec] [0.0…500.0]
Sets the right channel delay time.
Depth [0…200]
Sets the depth of LFO modulation.
Feedback [+/–100]
Sets the feedback amount. p.798.
High Damp [%] [0…100]
Sets the feedback damping amount in the high range
p.803.
LFO
Waveform [Triangle, Sine]
Selects the LFO Waveform.
Shape [+/–100]
Changes the curvature of the LFO Waveform. p.780.
Phase [degrees] [–40…+40]
Sets the LFO phase difference between the left and
right. See “Phase [degrees]” on page 779.
Frequency [Hz] [0.02…20.00]
This sets the LFO speed, in Hz.
Source [Off…Tempo]
This selects a modulation source for the Frequency.
Amount [–20.00…+20.00]
This sets the Frequency modulation amount, in Hz.
Type [Individual, Common1, Common2]
This controls whether the effect uses its individual
LFO, or one of the Common FX LFOs. For more
information, see “LFO Type” on page 777.
Common LFO Phase Offset [degrees] [+/–180]
When Type is set to Common FX LFO 1 or 2, this lets
you offset the phase from the master LFO.
OUTPUT
This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see “OUTPUT” on page 764.
AutoFade
LFO Frequency
Wet / Dry
Delay
Delay
Left
Right
Feedback
LFO Shape
LFO Phase
LFO: Tri / Sine
Wet / Dry
Wet / Dry
High Damp
Stereo In - Stereo Out