Filter
Top Products
Combination mode
400
P (Effect Preset) [P00, P01…15, U00…15, --------]
Effect Presets let you easily store and recall all of the
settings for an individual effect. You can store up to 16
user presets for each effect type, in addition to 15 re-
writable factory presets.
The same presets appear in all of the modes (Program,
Combi, Sequence, and Sampling), and sets of presets
can be saved to and loaded from disk.
Note that edits to effects parameters are automatically
stored with the Combi–you don’t need to store them as
an Effect Preset. Presets just make it easier to re-use
your favorite settings.
For instance, you can save an Effect Preset while
working on a particular Combi, and then later use the
same Effect Preset in a different Program, Combi, or
Song.
P00: Initial Set: These are the default settings that are
recalled when you select an effect type in the Insert FX
page. You can’t save your own settings here.
P01…P15: These contain preset data that Korg plans to
provide in the future. We recommend that you store
your settings in U00–U15.
U00…U15: These are areas in which you can store your
own settings.
---------------: This shows that no Effect Preset has been
selected. You’ll see this if you’ve just selected an effect,
written a program, or selected a new Combi. Selecting
this setting from the menu will not have any effect.
Note: Combis save the effects parameter settings, but
they don’t save the number of the selected Effect
Preset. If you select an Effect Preset, and then save the
Combi, the Effect Preset setting will revert to “-----------
---.”
For more details, see “Using Effect Presets” on
page 131.
IFX1 Parameters
Here you can set the effect parameters of the insert
effect you chose in the P8– Insert FX page.
For more details, please see “Insert Effects
(IFX1…IFX12)” on page 734.
8–7b: IFX2…12
Here you can set the effect parameters of the insert
effects selected in the Insert FX page.
The parameters for IFX2 through IFX12 are the same as
for IFX1. For more information, please see “8–7a: IFX1”
on page 399.
▼ 8–7: Page Menu commands
The number before each command shows its ENTER +
number-key shortcut. For more information on these
shortcuts, see “ENTER + 0-9: shortcuts for menu
commands” on page 138.
• 0: Write Combination. For more information, see
“Write Combination” on page 405.
• 1: Exclusive Solo. For more information, see
“Exclusive Solo” on page 138.
• 2: Copy Insert Effect. For more information, see
“Copy Insert Effect” on page 149.
• 3: Swap Insert Effect. For more information, see
“Swap Insert Effect” on page 150.
• 4: Write FX Preset. For more information, see
“Write FX Preset” on page 154.