Filter
Top Products
Program P8: Insert Effect 8–1: Routing
123
Program P8: Insert Effect
These pages let you can make settings for the insert
effects. For instance, you can:
• Send the output of a oscillator to an insert effect
• Route a sound to an insert effect
• Make detailed settings for insert effects
• Make common LFO settings for effects
For more information, please see “Effect Guide” on
page 727.
8–1: Routing
8–1a: Routing Map
This graphic shows an overview of the insert effects,
including the routing of the oscillators to the effects,
the effects names and on/off status, chaining between
the effects, and the output bus to which the insert
effects are themselves routed.
This page lets you adjust the routing of the oscillators
to the insert effects. To adjust the other settings shown
in this graphic, see “8–5: Insert FX,” as described on
page 126.
8–1b: Program Information & Use DKit
Bank [(INT–A…INT–G, USER–A…USER–G)]
Program Name [000…127/001…128: Name]
Tempo ( ) [040.00…240.00, EXT]
This area displays information about the program
selected for editing, including the Program Bank,
number, and name, and the tempo used for LFOs,
effects, and KARMA.
Use Dkit Setting [Off, On]
This is shown if Oscillator Mode is set to Drums. If
Oscillator Mode is set to Single or Double, this setting
is ignored. For more information, please see “Oscillator
Mode” on page 32.
On (checked): The Bus Select, FX Control Bus, Send 1,
and Send 2 settings (Global 5–3b) for each key of the
selected drum kit will be used. Check this setting if
you want to apply an individual insert effect to each
drum instrument, or to send individual drum
instruments to AUDIO OUTPUT (INDIVIDUAL).
Tip: In most preloaded drumkits, the drum
instruments have the same Bus Select settings
according to their type, as follows.
Snares → IFX1
Kicks → IFX2
Toms → IFX3
Cymbals → IFX4
Percussion, etc. → IFX5
Off (unchecked): The Bus Select, (8–1c) FX Control
Bus, (8–1d), “8–1f: OSC MFX Send” OSC MFX Send
settings will be used. All drum instruments will be sent
to the specified bus.
8–1PMC
8–1d 8–1e
8–1b
8–1a
8–1c
8–1f