Filter
Top Products
Disk: Page Menu Commands Save All (PCG, SNG and KSC)
717
If you decide that you don’t want to save a divided
file, press the Cancel button, and save your data to
media that has more available space.
2. When a volume of media fills up during the save,
the following dialog box will appear.
Insert the next volume of media and press the LCD
screen to make the OASYS detect the media, or use
“Drive Select” (0–1a) to specify the save-destination
media.
3. Press the Select button to continue saving. If the
“No space available on medium” dialog box
appears again, repeat steps 1–3.
Saving will be halted if you press the Cancel button.
If you then want to abort the save operation, press
the OK button in the dialog box.
If you press the Skip button, the indicated file will
be skipped, and the next file will be saved.
Save All (PCG, SNG and KSC)
This command saves all programs, combinations,
drum kits, wave sequences, and global settings as a
.PCG file, songs and regions data as a .SNG file, and
multisamples and samples created in Sampling mode
as a .KSC file to the specified media.
This command is valid only when the current directory
is a DOS directory.
1. Select “Save All” to open the dialog box.
Save All (PCG, SNG and KSC)
2. Use the text edit button to move to the text input
dialog box, and specify the filename.
For example if you specify NEWFILE and execute
the save command, files named NEWFILE.PCG,
NEWFILE.SNG, and NEWFILE.KSC will be saved
to the media.
3. Select the bank(s) that you want to save.
Programs, combinations, drum kits, and wave
sequences can be saved in units of banks.
Information on the bank to be saved is displayed
below each Selection button. Banks that are checked
will be saved.
If you want to modify the selections, press the
Selection button to open the dialog box, and check
the check boxes for the data you want to save.
Example: when the Selection button for Program is pressed
If you press the All button, all banks will be
checked.
If you press the Nothing button, all banks will be
unchecked.
Press the OK button to change the selections as
specified, or press the Cancel button to discard your
changes.
To specify whether “Global Settings” will be saved,
use the check box in step 1.
4. To save the data, press the OK button. To cancel
without saving, press the Cancel button.
If “No space available on medium” dialog box will
appear. Refer to “If the data being saved does not fit
on one volume of media,” and use the procedure
given there to save the data.
When you save, files will be created in the current
directory. If the data you save extends across two or
more media, these files will be divided. In addition
to the .PCG, .SNG, and .KSC files that will be
created with the specified filename, one directory
will also be created. The files listed in
NEWFILE.KSC will be saved in this directory.
In addition to the .PCG, .SNG, and .KSC files
created with the specified filename, two directories
will also be created.
One directory will have the “specified
filename” as its directory name, and will
contain the files listed in .KSC. (File:
purple)
The other directory will have “(specified
filename)_A” as its directory name, and
will contain the WAVE files used by the
regions of each audio track in each song.
(File: red)
(SNG Name
6th characters)_A
SONG000
...
SONG000
ATRACK01
...
ATRACK16