Filter
Top Products
Sampling mode
582
Master Volume Slider
Master Volume [000…127]
This controls the volume of the main stereo outputs,
after the Total Effects. It does not affect Individual
Outputs 1–8.
Master Volume
0–9c: Audio Inputs
This Control Assign setting lets you adjust the volume,
pan, and FX send settings for each of the six audio
inputs: Analog 1–4, and S/P DIF left and right.
Mixer Knobs [Channel Strip, Individual Pan]
This switch controls whether the knobs show the pan
settings for all 6 inputs at once (Individual Pan), or the
pan and FX Send levels for the selected input (Channel
Strip). For more information, please see “Mixer Knobs”
on page 582.
Knobs 1–8, Channel Strip
When the Mixer Knobs switch is set to Channel Strip,
the knobs provide quick access to the selected input’s
Pan and FX Send parameters.
Pan [L000…C064…R127]
This controls the stereo pan of the selected input. A
setting of L000 places the sound at the far left, C064 in
the center, and R127 to the far right.
Send 1 [000…127]
This controls the send level into FX Send 1. If the
input’s Output Bus parameter is set to L/R or OFF, it
scales the programmed send level. If the Output Bus is
set to IFX 1–12, it directly controls the post-IFX send
levels, overwriting any previous setting.
Send 2 [000…127]
This controls the send level into FX Send 2. For more
details, see “Send 1,” above.
Knobs 1–6, Individual Pan
When the Mixer Knobs switch is set to Individual Pan,
knobs 1–4 control the pan settings for analog inputs 1–
4, respectively, and knobs 5–6 control the pan settings
for the left and right S/P DIF inputs.
Audio Input Pan (1–6) [L000…C064…R127]
These control the pan for Analog Inputs 1–4 and
S/P DIF Left and Right, respectively. A setting of L000
places the sound at the far left, C064 in the center, and
R127 to the far right.
TFX 2
Control Surface
Master Volume
Slider
Front Panel
Analog Volume
Slider
Universal Exclusive
Master Volume
(Fom Knobs, Pedals,
MIDI, or Sequencer)
Headphone
& Main L/R
Outputs
S/PDIF
Output
0–9c