Filter
Top Products
Disk: Page Menu Commands Load selected
709
Load a Region
This loads the selected region data into the region
number you select as the load-destination.
1. If you’re loading region data other than the
selected data, use “Region” (the upper line) to
reselect the region data you want to load.
2. Use “To Region” (the lower line) to select the load-
destination region.
3. To load the data, press the OK button. To cancel
without loading, press the Cancel button.
Load .KFX
All data from the .KFX file will be loaded. All preset
data (P01–15) and user data (U00–15) for all effects will
be loaded.
1. To load the data, press the OK button. To cancel
without loading, press the Cancel button.
Load All Presets (P01–P15)
All preset data from the .KFX file will be loaded. All
preset (preset) data (P01–15) for all effects will be
loaded.
1. To load the data, press the OK button. To cancel
without loading, press the Cancel button.
Load All Presets (U00–U15)
All user data from the .KFX file will be loaded. All
preset (user) data (U01–15) for all effects will be
loaded.
1. To load the data, press the OK button. To cancel
without loading, press the Cancel button.
Load Presets (P01–15)
Preset (preset) data (P01–15) for the selected effect will
be loaded.
Load Presets (P01-P15) in “Stereo Dyna Compressor”
1. To load the data, press the OK button. To cancel
without loading, press the Cancel button.
Load Presets (U00–15)
Preset (user) data (U00–15) for the selected effect will
be loaded.
Load Presets (U00-U15) in “Stereo Dyna Compressor”
1. To load the data, press the OK button. To cancel
without loading, press the Cancel button.
Load a Preset (P)
The selected effect preset data (P01–15) will be loaded
into the load-destination effect preset number (P01–15,
U00–U15) you specify.
Load a Preset in “Stereo Dyna Compressor”
1. If you’re loading an effect preset other than the
selected one, use “Preset” (the upper line) to re-
select the effect preset that will be loaded.
2. Use “To Preset” (the lower line) to select the load-
destination effect preset.
3. To load the data, press the OK button. To cancel
without loading, press the Cancel button.
Note: If “Multiple Select” (0–1a) is checked and you’ve
selected more than one effect preset, the data will be
loaded starting with the effect preset you specified in
the “To” field.