Filter
Top Products
Master Effects (MFX1, 2) In/Out
747
Master Effects (MFX1, 2)
In/Out
The I/Os of Master Effects MFX1 and MFX2 are stereo-
in/stereo-out. Send1 and Send2 determine the send
level to the Master Effects. (For Send1 and 2, see
“Routing” and “Mixer.”)
Master effects will not output the Dry (unprocessed)
signal specified in Wet/Dry (P9 - MFX1, 2 page). Only
the Wet (processed) signal will be output. The output
signals from the Master Effects are routed to the L/R
bus with the output level specified by Return1 and
“Return2.” These output signals are mixed with the
output signals from the bus specified by Bus Select
(P8: “Routing” page in each mode) L/R, or with the
output signals from the bus specified by Bus Select
(“Insert FX” page in each mode) L/R, then routed to
the Master EQ.
Selecting “000: No Effect” will mute the output. The
processed signal will be output in one of the following
ways, according to the type of effects 001–185.
Mono–Mono Parallel
141: P4EQ//P4EQ-185: Mt.BPM Dly//Mt.BPM Dly
These effects are typically stereo-in/stereo-out, but
they have a special structure. The L channel and R
channel of the stereo input each have their own
independent mono effect. Each mono output can then
be panned to the desired position in the stereo field.
Normally, you will use these as insert effects, but you
can also use them as master effects. For details, see
“Mono–Mono Parallel Effects” on page 734.
Pressing the ON/OFF button for MFX1 and 2 of the P9:
Routing page in each mode will toggle between ON
and OFF. When OFF is selected, the output signals will
be muted.
Separately from the setting of this ON/OFF button,
MFX1 and MFX2 can be switched off by receiving a
MIDI control change CC#94. Value 0 will turn them
off, and value 1–127 will turn them on. You can also
use “Effect Global SW” (Global 0–1b) to turn MFX1
and 2 on and off. This MIDI control is performed on
the global MIDI channel.
Routing
Master effects MFX1 and MFX2 can both be used in
any mode. If you are not using any Insert Effects in any
mode, the Master Effects send levels are determined by
Stereo In - Stereo Out
Mono In - Mono Out
Mono In - Stereo Out
Effect
Effect
Effect
+
Effect
+
Wet
Mono In/Out Effect
Mono In/Out Effect
Pan
Pan