Filter
Top Products
Sampling mode
584
When you select an External Setup, it stays selected
even when you change Programs, or switch to Combi
or Sequencer modes. This makes it easy to select
different OASYS sounds without disrupting any
external MIDI control, and vice-versa.
Setup [000…127]
This selects the Global setup for the knobs, sliders,
switches, and drum pads.
Note: this selection is not stored with the Program.
Knobs 1–8
MIDI Channel (1–8) [(01…16, Gch)]
This read-only parameter shows the MIDI Channel
assigned to the knob. Each can send on a different
channel, if desired.
Gch means that the knob will transmit on the Global
MIDI Channel, as set in Global mode. This allows you
to re-direct any number of sliders, knobs, switches, and
pads to a different channel at once, without editing the
individual controls.
CC# Assign (1–8) [(Off, 000…119)]
This read-only parameter shows the MIDI CC sent by
the knob.
Value (1–8) [000…127]
This is the current value of the knob’s MIDI CC.
Switches 1–16
MIDI Channel (1–16) [(01…16, Gch)]
This read-only parameter shows the MIDI Channel for
the switch. Each can send on a different channel, if
desired.
Gch means that the slider will transmit on the Global
MIDI Channel, as set in Global mode.
CC# Assign (1–16) [(Off, 000…119)]
This read-only parameter shows the MIDI CC sent by
the switch.
Switch On/Off (1–16) [On, Off]
When the switch is turned on, it sends a value of 127;
when it is turned off, it sends a value of 0.
Sliders 1–8 & Master Slider
MIDI Channel (1–8) [(01…16, Gch)]
This read-only parameter shows the MIDI Channel for
the slider. Each can send on a different channel, if
desired.
Gch means that the slider will transmit on the Global
MIDI Channel, as set in Global mode.
CC# Assign (1–8) [(Off, 000…119)]
This read-only parameter shows the MIDI CC sent by
the slider.
Value (1–8) [000…127]
This is the current value of the slider’s MIDI CC.
0–9e: R. Time Knobs
This Control Assign setting lets you modulate
Oscillators and Effects parameters with the eight
knobs.
If you want to save the sound you’ve edited here, you
can resample it.
Knobs 1–8
Knobs 1–4 all have dedicated functions which
correspond to MIDI CCs. Knobs 5–8 can be assigned to
a wide variety of functions, many of which also have
corresponding MIDI CCs.
0–9e