Filter
Top Products
Sequencer mode
534
–: Not set automatically
[ ]: Set automatically according to the parameter
settings in the dialog box
*1[ ] User Global Setting: Edit Song Parameters
[x] User Global Setting: Edit Global Parameters
*2The input source specified as Source Audio will
be set.
*3L-Mono if the Source Audio is Mono-L, R-Mono if
it is Mono-R, and Stereo if it is Stereo
*4When Save to=RAM
*5When Save to=RAM, when Convert to
Program=On
*6If IFX=Off, set to [Source Audio]. If Stereo, turn
Stereo Pair off
If IFX=IFX1…12, set to REC1/2 (Stereo) or REC1
(Mono)
*7If IFX=IFX1…12, specify the Bus Select of that
IFX1…12. If effects are chained, specify the last IFX
in the chain.
*8If the source audio Mode=Stereo, Multi REC is
turned On, and a stereo pair is set to REC as the To
track.
Set the From Track “REC Bus” to REC1/2.
Bounce All Tracks To Disk
This command bounce-records all tracks in the song to
a single WAVE file (stereo).
Simply use the dialog box to specify the bounce-
recording destination song and the name of the file
that will be created, and press the OK button. The
WAVE file will be created automatically.
1. Use “Song Select” to select the song you want to
bounce.
Audio Track
Play/Rec/Mut
e
Play
[Recording Track]:
REC
*8
[To][Mode]:
REC
*8
– – –
Solo – – [From]: Solo On – – –
REC Source In1
[Source
Audio][IFX]
*6
REC 1/2
*8
– – –
Stereo Pair Off [Source Audio]
*6
[Mode]
*8
–– –
Sampling
Setup
(Name)
Source Bus L/R – – L/R L/R REC1/2
Source Direct
Solo
(N/A) – – (N/A) (N/A) Off
Trigger Note On – –
Sequencer
START SW
Note On
Sampling
START SW
Metronome
Precount
(N/A) – – (N/A) (N/A) –
Save to RAM – – DISK [Save to] [Save to]
Mode Stereo – – Stereo Stereo
[Source
Audio]
*3
Sample
Time(RAM)
Maximum – – (N/A) – –
Sample
Time(DISK)
80min? – – – – –
Rec Level +0.0 – – +0.0 +0.0 +0.0
Select
Sample
Auto +12dB
On
On – – – On
*4
On
*4
Convert to
Program
Off – – –
[Convert to
Program]
*5
[Convert to
Program]
*5
Program – – – – [Program]
*5
[Program]
*5
MS – – – –
(Newly
created
)
*5
(Newly
created
)
*5
Original Key – – – – (C2)
*5
(C2)
*5
Seq. Event – – – – – On
*5
MIDI Track – – – – – [To]
*5
Select
Directory
– – – – – – –
Insert FX
Bus Select
(Post IFX)
–
REC1/2(st),
REC1(mn)
*7
––––
Initialize
HDR (Audio
Track Recording)
Bounce Audio
Track
2ch Mix to
Disk
Resample
SEQ Play
In-Track
Sampling