Filter
Top Products
Error and confirmation messages U (Unable to create directory–USB Hub)
1027
The system update has now been
installed. To complete the process, you
must now restart the OASYS. Please turn
the power off, and then on again.
Meaning: This will appear when you execute the
Global P0 page menu command “Update System
Software.” To complete the update, restart the system.
Turn the power switch off, and then on again.
This file is already loaded
Meaning: When loading a divided .PCG file, you
attempted to load a file that had already been loaded.
• Load the .PCG files that have not yet been loaded.
Track is full
Meaning: In the Disk mode Make Audio CD page, you
attempted to insert a track that would make the total
exceed 99 tracks.
• Cut unneeded tracks, and then execute the Insert
operation once again.
U (Unable to create directory–USB Hub)
Unable to create directory
Meaning: You attempted to create a directory that
would exceed the maximum path name length (76
characters for the full path name).
Unable to save file
Meaning: When executing the Disk mode Utility
command “Copy,” the copy destination path length
exceeded 76 characters.
Meaning: When saving a file in Disk mode, the save
destination path exceeded 76 characters.
Meaning: When you executed the Disk mode Utility
page menu command “Copy,” the file management
data exceeded the size of the management area.
Meaning: When sampling to disk, the save-destination
path for the WAVE file exceeded 76 characters.
Update Error
Meaning: This will appear when you execute the
Global mode command “Update System Software” if
the update could not be performed correctly.
• Try again. Alternatively, try again using a different
CD.
USB HUB Power exceeded
Please disconnect USB device
Meaning: The power consumption of your USB
devices has exceeded the capacity of the hub to which
they are connected. The USB hub will not be
recognized correctly in this state. To solve this
problem:
• If you’re using a USB hub or device that is capable
of being self-powered, use it in self-powered mode.
If you are using more than one USB hub, you may
be able to solve the problem by reconnecting a
device to a different USB hub. After you’ve
reconnected your device(s), execute “Scan USB
Device.”
W (Wave)
WAVE files on this external medium will
not be played with sequencer audio track
playback. Copy SNG and WAVE Directory
to Internal HDD, and load SNG from
internal HDD
Meaning: The WAVE file used by the SNG data you’re
loading in Disk mode exists on external media, and
will not play back correctly when loaded. Hard disk
recording functionality and audio track
recording/playback is available only on the internal
hard disk. To solve this problem:
Copy the .SNG file and the directory for that .SNG file
(the directory containing the WAVE files it uses) to the
same directory of the internal hard disk, and then load
the data again.
WAVE file size over limit
Meaning: When editing an audio track in Sequencer
mode, you exceeded the maximum number of
230,400,000 samples (80 minutes at a sample rate of 48
kHz) allowable in a WAVE file.
• When editing an audio track, you cannot edit a
WAVE file that exceeds 230,400,000 samples (80
minutes at a sample rate of 48 kHz).