Filter
Top Products
Sequencer mode
556
Note: If you press the SEQUENCER START/STOP
switch while the dialog box is open, the selected
pattern will play back.
2. In Pattern and Pattern Select, select the “put”
source pattern.
(By default, this will be the pattern selected in the
Pattern Edit page)
• In To: Track, select the “put” destination MIDI
track.
3. In Measure, specify the first measure of the “put”
destination.
4. To execute the Put To MIDI Track command, press
the OK button. When you execute the command,
Measure will automatically count up.
If you wish to, you can continue “putting” the
pattern. To exit the command, press the Exit button.
Copy To MIDI Track
This command copies the specified area of musical
data from the specified pattern to a MIDI track as
musical data.
Unlike the Put To MIDI Track command, this
command actually writes the musical data of the
pattern into the MIDI track, so that you can edit the
copied data in the track. Even if you later edit the copy
source pattern, the musical data of the song will not be
affected.
When you execute the Copy To MIDI Track command,
the musical data will be affected as follows.
• Musical data previously existing in the copy
destination measures will be erased.
• The musical data that is copied will playback
according to the time signature specified at the
copy destination measures.
The procedure is the same as for the Put To MIDI Track
command. For more information, see “Put To MIDI
Track” on page 555.
Copy KARMA Module
For more information, please see “Copy KARMA
Module” on page 408.
Initialize KARMA Module
For more information, please see “Initialize KARMA
Module” on page 409.
Copy Scene
For more information, please see “Copy Scene” on
page 147.
Swap Scene
For more information, please see “Swap Scene” on
page 147.
Capture Random Seed
For more information, please see “Capture Random
Seed” on page 147.
Auto Assign KARMA RTC Name
For more information, see “Auto Assign KARMA RTC
Name” on page 139.
Copy Insert Effect
For more information, please see “Copy Insert Effect”
on page 149.
Note: the slot’s MIDI control channel, as specified by
the Ch parameter on the IFX1–12 pages, will not be
copied.
Swap Insert Effect
For more information, please see “Swap Insert Effect”
on page 150.
Note: the slot’s MIDI control channel, as specified by
the Ch parameter on the IFX1–12 pages, will not be
swapped.
Insert IFX Slot
For more information, please see “Insert IFX Slot” on
page 150.
Cut IFX Slot
For more information, please see “Cut IFX Slot” on
page 151.
Clean Up IFX Routings
For more information, please see “Clean Up IFX
Routings” on page 152.
DrumKit IFX Patch
For more information, please see “Drum Kit IFX
Patch” on page 410.
1 432
1 432
Pattern 41
Example: Copy the musical data of pattern 41 to measure 2
Before Copy
After Copy