Filter
Top Products
Sequencer P7: KARMA 7–6: Perf Real-Time Parameters
505
7–6: Perf Real-Time Parameters
Here you can assign controllers to KARMA
Performance Real-Time Parameters (Perf. RTP) outside
of the GE Real-Time Parameters that control the
internal settings of the GE. Examples include the
KARMA Key Zone parameters (Combination 7–1b)
and KARMA Control and Trigger parameters
(Combination 7–3, 7–4).
For more information, please see “7–6a: Perf Real-Time
Parameters (1…8)” on page 385.
7–6a: Perf Real-Time Parameters
1...8
Group [Off, PE, Mix, Control, Trigger, Key Zones,
Random Seeds]
Parameter [---, Time Signature…
Retrigger Each Time]
Min (Minimum Value) [–8192…+8191]
Max (Maximum Value) [–8192…+8191]
Value [–8192…+8191]
A/B/C/D [Off, On]
Assign
[---, Slider1…8, Slider1…8(SW), SW1…8,
DynaMIDI1…8]
Polarity [+, –]
Please see “7–6b: Perf Real-Time Parameters” on
page 112, and “7–6a: Perf Real-Time Parameters
(1…8)” on page 385.
▼ 7–6: Page Menu Commands
The number before each command shows its ENTER +
number-key shortcut. For more information on these
shortcuts, see “ENTER + 0-9: shortcuts for menu
commands” on page 138.
• 0: Memory Status. For more information, see
“Memory Status” on page 524.
• 1: Exclusive Solo. For more information, see
“Exclusive Solo” on page 138.
• 2: Copy KARMA Module. For more information,
see “Copy KARMA Module” on page 408.
• 3: Initialize KARMA Module. For more
information, see “Initialize KARMA Module” on
page 409.
• 4: Copy Scene. For more information, see “Copy
Scene” on page 409.
• 5: Swap Scene. For more information, see “Swap
Scene” on page 409.
• 6: Capture Random Seed. For more information,
see “Capture Random Seed” on page 409.
• 7: FF/REW Speed. For more information, see
“FF/REW Speed” on page 525.
• 8: Set Location (for Locate Key). For more
information, see “Set Location (for Locate Key)” on
page 525.
• 9: Copy From Program. For more information, see
“Copy From Program” on page 526.
1–1a
7–6a
7–6PMC