Korg Electronic Keyboard Electronic Keyboard User Manual


  Open as PDF
of 1127
 
Sampling P0: Recording 0–9: Control Surface
579
10: MS Stereo To Mono. This will appear only if
the current MS is Stereo. For more information, see
“MS Mono To Stereo/MS Stereo To Mono (Change
Multisample Type)” on page 619.
11: Optimize RAM. For more information, see
“Optimize RAM” on page 139.
12: Select Directory. This applies only when Save
to is set to Disk. For more information, see “Select
Directory” on page 140.
13: Auto Sampling Setup. For more information,
see “Auto Sampling Setup” on page 620.
0–9: Control Surface
The Control Surface is the set of 9 sliders, 8 knobs, and
16 switches to the left of the LCD display. It looks like a
mixer, but it can do other things as well, including
editing sounds, controlling KARMA, and sending
MIDI messages to external devices.
This page shows you the current values for each of the
sliders, knobs, and buttons, along with information
about what they are controlling. For instance, you can:
Adjust the Oscillator’s (multisample) volume and
pan
Control the Oscillator’s (multisample) EQ settings
and Master Effects Send levels
Modulate Oscillators (multisample) and effects
using the Real Time Knobs
Use the sliders and switches to control external
MIDI devices.
Control Assign Switches and Tabs
You can switch the Control Surface between its
different functions using either the tabs on the left side
of the LCD display, or the front-panel Control Assign
switches. The tabs and the front-panel switches mirror
one another; when you change one of them, the other
changes as well.
Control Assign switches
In Sampling mode, you can select one of five different
functions:
TIMBRE/TRACK lets you adjust the Oscillator’s
(multisample) volume, pan, and send levels, along
with the EQ.
AUDIO INPUTS lets you adjust the volume, pan, and
send levels for the analog and S/P DIF audio inputs.
EXTERNAL lets you send MIDI messages to external
MIDI devices.
R.TIME KNOBS/KARMA lets you modulate sounds
and effects with the knobs.
0–9a
0–9b
0–9c
0–9d
0–9PMC
INPUTS
HDR 1-8
HDR
9
-1
6
6