Filter
Top Products
Sequencer mode
492
5–3: RPPR Setup
Here you can make settings for the RPPR (Realtime
Pattern Play/Recording) function. RPPR lets you
assign patterns to individual keys, and then playback
patterns simply by pressing individual notes on the
keyboard. This performance can be recorded in real-
time.
For each song, you can assign either a preset pattern or
a user pattern to each of the 72 keys in the range C#2–
C8. For each key, you can specify the pattern, track
number, and how the pattern will be played.
Keys used to play patterns via RPPR cannot be used
for the KARMA function. If RPPR is on, keys to
which a pattern is not assigned will play the
program of the track that’s selected in Track Select.
In this case, the KARMA function will operate if
KARMA Module A, B, C, or D is assigned to the
track and turned on. Also, notes generated by the
KARMA function will not trigger the RPPR
function.
When Local Control is OFF (“Local Control On”
Global 1–1a), the keyboard will not trigger RPPR
pattern playback. Notes received at MIDI IN on the
channel of the track currently selected by Track
Select will trigger patterns. If you have recorded
only the trigger notes on an external sequencer and
wish to use the playback from the external
sequencer to trigger RPPR patterns on OASYS, set
Local Control OFF.
If you want the note data generated by RPPR to be
recorded by the external sequencer, set Local
Control ON, and turn off the echo back function of
the external sequencer. See “Local Control On
settings” on page 1002.
In the RPPR Setup page, RPPR is turned on
automatically. This will be the same result as when
the RPPR check box (0–1a) in each page is checked.
5–3a: Song Select, Track Select, Tempo
Song Select [00…199: name]
Selects the desired song. The RPPR settings will be
assigned to the song you select here.
Track Select [MIDI Track01…MIDI Track16,
Master Track, Audio Track01…Audio Track16]
When you play a key that is not assigned to RPPR, it
will sound using the settings of the track that’s selected
in Track Select. Use this to select the track that you
want to play together with RPPR, or to audition a
pattern before you assign it. The program bank,
number, and name of the selected track is shown at the
right.
Each RPPR pattern will begin playing when you press
the assigned key, regardless of the Track Select setting.
It will sound using the settings of the track selected in
“Track Name.”
The Master Track and Audio Track 01–16 settings
are ignored. The last-selected MIDI Track 01–16 will
be used.
(Tempo) [040.00…240.00, EXT]
Specifies the playback tempo of the patterns. (0–1a)
5–3a
5–3b
5–3c
5–3PMC