Filter
Top Products
Sequencer P1: EQ/Vector/Controller 1–8: Set Up Controllers
463
Momentary: The function will be on only while you
continue holding down the SW1 switch.
SW2 [Off, …, After Touch Lock]
Mode [Toggle, Momentary]
Assigns a function to the SW2 switch. The functions
you can assign to the SW2 switch are the same as for
the SW1 switch with the exception than SW1
Mod.:CC#80 is replaced by SW2 Mod.:CC#81.
1–8b: Modulation Knob Assign
Here you can assign the function of the realtime
modulation knobs 5 through 8. Most of the functions
that can be assigned are control changes. For more
information, please see “Realtime Knobs 5–8
Assignments” on page 980.
The functions you assign here are performed when
you operate realtime modulation knobs 5 through 8.
Knob 5 [Off, …, MIDI CC#119]
Knob 6 [Off, …, MIDI CC#119]
Knob 7 [Off, …, MIDI CC#119]
Knob 8 [Off, …, MIDI CC#119]
▼ 1–8: Page Menu Commands
The number before each command shows its ENTER +
number-key shortcut. For more information on these
shortcuts, see “ENTER + 0-9: shortcuts for menu
commands” on page 138.
• 0: Memory Status. For more information, see
“Memory Status” on page 524.
• 1: Exclusive Solo. For more information, see
“Exclusive Solo” on page 138.
• 2: Rename Song. For more information, see
“Rename Song” on page 524.
• 3: Delete Song. For more information, see “Delete
Song” on page 524.
• 4: Copy From Song. For more information, see
“Copy From Song” on page 524.
• 5: Load Template Song. For more information, see
“Load Template Song” on page 524.
• 6: Save Template Song. For more information, see
“Save Template Song” on page 525.
• 7: FF/REW Speed. For more information, see
“FF/REW Speed” on page 525
• 8: Set Location (for Locate Key.) For more
information, see “Set Location (for Locate Key)” on
page 525.
• 9: GM Initialize. For more information, see “GM
Initialize” on page 526.
• 10: Copy From Combination. For more
information, see “Copy from Combination” on
page 526.
• 11: Copy From Program. For more information, see
“Copy From Program” on page 526.